Chinese Marks on old Porringer?

PHOTOS REQUIRED - marks + item
Post Reply
MatthewT
Posts: 2
Joined: Sat Aug 20, 2022 7:48 pm

Chinese Marks on old Porringer?

Post by MatthewT »

Picked up this old porringer (quite heavy) with these small Chinese characters on the underside of the handle.
Can anybody help with these marks?Image
Image
Image
dognose
Site Admin
Posts: 62106
Joined: Thu Dec 29, 2005 12:53 pm
Location: England

Re: Chinese Marks on old Porringer?

Post by dognose »

Hi,

Welcome to the Forum.

Please try again with the images, but remember to use the preview feature.

Trev.
dognose
Site Admin
Posts: 62106
Joined: Thu Dec 29, 2005 12:53 pm
Location: England

Re: Chinese Marks on old Porringer?

Post by dognose »

Always embed your images:

Image

Image

Image

Trev.
AllSeasons
Posts: 265
Joined: Sun Jul 11, 2021 2:35 pm

Re: Chinese Marks on old Porringer?

Post by AllSeasons »

These are traditional Chinese characters, or kanji in Japanese. The image of the marks is actually upside down. The marks say "宮本" (likely maker's name or monogram written from top to bottom) and "銀純" (pure silver written from left to right). To me, "宮本" actually sounds Japanese, so this may have a Japanese origin. But other than that, I couldn't tell you more. Hope this helps.
SilverBuggy
Posts: 32
Joined: Tue May 18, 2021 10:35 pm

Re: Chinese Marks on old Porringer?

Post by SilverBuggy »

Japanese silverware. The maker's name is "宫本", and the other mark "純銀" means that it is made of pure silver, probably of higher grade than 925.
Adrien von Ferscht
contributor
Posts: 32
Joined: Mon Sep 24, 2012 1:20 pm
Location: Glasgow, Scotland, UK
Contact:

Re: Chinese Marks on old Porringer?

Post by Adrien von Ferscht »

Belatedly
The mark is the mark of MIYAMOTO-SHOKO 宮本 ミヤモト ショコ
dognose
Site Admin
Posts: 62106
Joined: Thu Dec 29, 2005 12:53 pm
Location: England

Re: Chinese Marks on old Porringer?

Post by dognose »

Post Reply

Return to “Far East”