Page 1 of 1

West & Sons, Dublin Ireland Dish Design Patent# at the t

Posted: Fri Sep 14, 2007 11:00 pm
by janel-lovett
http://img.auctiva.com/imgdata/3/0/2/7/ ... 6206_o.jpg" onclick="window.open(this.href);return false;
http://img.auctiva.com/imgdata/3/0/2/7/ ... 6621_o.jpg" onclick="window.open(this.href);return false;

I am really wanting to know more about the dish and its origin.

It is marked on the back, near top, : 102735.

Then underneath, it has a very oblong diamond, that says "MH&EOEPGS"
I think that is the hallmark.
But I cannot find this hallmark on the site.

Underneath that it says " WEST&SON" with "DUBLIN" underneath.
I understand that is a retailer on Grafton St. in Dublin, Ireland.

Then, more than 2/3 of the way down, there is a "1".
No idea what the 1 means.....

I am trying to figure out if the 102735 at the top is the U.S. Design Patent number, or if it is a U.S. Mechanical Patent number.

Since it is retailed by West&Sons in Dublin, Ireland, I am not sure if it is American or British! And if the patent #'s apply! If they do, it is from 1870 or 1937, depending.

Please Help!

Thank You,
Janel

Posted: Sat Sep 15, 2007 2:44 pm
by 2209patrick
Hello Janel.

Sounds like British silverplate marks to me.
Could the letters be MH &Co. ?

Check out Martin, Hall & Company's third mark down:
http://www.925-1000.com/silverplate_M.html" onclick="window.open(this.href);return false;



Pat.

Thanks for the marks, but no.

Posted: Sat Sep 15, 2007 3:34 pm
by janel-lovett
It is not like these illustrations. The MH is like on your keyboard. The E has a little loop in the middle, but definately not a Co. in there.

Any other ideas on the # sequence, or the "1" stamp? Anyone?

Thank You, Patrick, for your help.

I really appreciate it!

Janel