Need Help to ID maker of this Silver Plated piece
-
btalarczyk
- Posts: 13
- Joined: Tue Dec 29, 2015 2:16 am
Need Help to ID maker of this Silver Plated piece
See images below. I spent about an hour looking through the picture maker marks section of british and American silver and silverplate but came up short on an ID. Can anyone help?
-
btalarczyk
- Posts: 13
- Joined: Tue Dec 29, 2015 2:16 am
Re: Need Help to ID maker of this Silver Plated piece
Can anyone help with the ID of the maker of this piece?
-
SteveDWollongong
- contributor
- Posts: 254
- Joined: Sun Mar 22, 2015 3:28 am
- Location: Australia
Re: Need Help to ID maker of this Silver Plated piece
Hi,
Your marks have been seen (with slight variations)before, but unfortunately remain unidentified. They have only ever been seen on silver plated items. I notice yours is stamped NS....just wondering if it is possibly made from nickel silver rather than silver plated? Is there any base metal showing where plating might of rubbed off does?
Here is a link to one of the previous discussions on your marks. If you use the forum search facility and search on ram you may find more.
http://www.925-1000.com/forum/viewtopic ... am#p106494
Cheers,
Steve
Your marks have been seen (with slight variations)before, but unfortunately remain unidentified. They have only ever been seen on silver plated items. I notice yours is stamped NS....just wondering if it is possibly made from nickel silver rather than silver plated? Is there any base metal showing where plating might of rubbed off does?
Here is a link to one of the previous discussions on your marks. If you use the forum search facility and search on ram you may find more.
http://www.925-1000.com/forum/viewtopic ... am#p106494
Cheers,
Steve