What is silver soldered? Is this a higher percentage of silver than a normal silver plated piece? For instance the creamer marked 8oz actually weighs 16oz total.
Thanks
.
Silver Soldered?
-
2209patrick
- co-admin
- Posts: 3550
- Joined: Fri Feb 10, 2006 9:53 pm
- Location: Land of Lincoln, USA
-
silverport
- contributor
- Posts: 870
- Joined: Tue Jun 30, 2009 7:18 pm
- Location: Portugal
»Silver soldered« >< »Tin soldering«
Hello
»Silver soldered« mark, most times on hollowware products, be used also in printed product descriptions (e.g. in sales promotion folders), signification is that ALL parts (especially handles, lids ...) of that item were mounted together with use of special silver alloy's as solder material = also called "hard soldered", when products basic material was e.g. brass or copper.
»Tin soldering« was in then past time used for hollowware products, made of tin or »Britannia« alloy (a tin-antimony alloy - please don't confuse this with »Britannia Standard« for Silver!); and later it was used for products made from brass, copper or even nickel silver. That was cheaper; but products had to be carefully handled from the clients.
Products made from »Britannia« alloy came up in mid 19 century in England (and same time range maybe in Meriden, CT, USA as well?); and were an actual material used for hollowware, present in First World Exhibition 1851 in London. Got 1873 his high rise on Vienna World Exhibition — almost hollowware products shown there, were in »Art Eclecteau« (Eclecticism — especially: Historic Styles Revival). »Britannia« alloy lost his importance on beginning of First World War — because tin was an essential solder for ammunition … After First World War, products made from »Britannia« alloy, never have got back their market.
»Silver soldered« products withstand the daily use in Hotels, Restaurants, and at home too much better.
Kind regards silverport
.
»Silver soldered« mark, most times on hollowware products, be used also in printed product descriptions (e.g. in sales promotion folders), signification is that ALL parts (especially handles, lids ...) of that item were mounted together with use of special silver alloy's as solder material = also called "hard soldered", when products basic material was e.g. brass or copper.
»Tin soldering« was in then past time used for hollowware products, made of tin or »Britannia« alloy (a tin-antimony alloy - please don't confuse this with »Britannia Standard« for Silver!); and later it was used for products made from brass, copper or even nickel silver. That was cheaper; but products had to be carefully handled from the clients.
Products made from »Britannia« alloy came up in mid 19 century in England (and same time range maybe in Meriden, CT, USA as well?); and were an actual material used for hollowware, present in First World Exhibition 1851 in London. Got 1873 his high rise on Vienna World Exhibition — almost hollowware products shown there, were in »Art Eclecteau« (Eclecticism — especially: Historic Styles Revival). »Britannia« alloy lost his importance on beginning of First World War — because tin was an essential solder for ammunition … After First World War, products made from »Britannia« alloy, never have got back their market.
»Silver soldered« products withstand the daily use in Hotels, Restaurants, and at home too much better.
Kind regards silverport
.
-
dragonflywink
- co-admin
- Posts: 2500
- Joined: Wed Jun 22, 2005 10:42 am
- Location: Orlando, Florida
- Contact:
“Silver Soldered”, sometimes commercially referred to as “Hard Soldered” is a method of joining separate parts of and silver plated pieces, such as handles to tea pots and knife blades to hafts.
Soft solder, usually tin based, is more commonly used for other metals such as lead and is not suitable for silver or nickle silver and copper articles, which are to be silver plated. It has a comparatively low melting point and should not be used for the repair or manufacture of silverwares.
Silver solder, as all solders, needs to have a melting point, lower that the pieces to be joined. It comes in a variety of grades, with Hard Solder having a melting point of 745-779 degrees centigrade. A ounce of typical hard solder will be an alloy of 16dwt fine silver 3dwt 12gr copper and 12gr zinc.
Hope this adds to the information.
Paul.
.
Soft solder, usually tin based, is more commonly used for other metals such as lead and is not suitable for silver or nickle silver and copper articles, which are to be silver plated. It has a comparatively low melting point and should not be used for the repair or manufacture of silverwares.
Silver solder, as all solders, needs to have a melting point, lower that the pieces to be joined. It comes in a variety of grades, with Hard Solder having a melting point of 745-779 degrees centigrade. A ounce of typical hard solder will be an alloy of 16dwt fine silver 3dwt 12gr copper and 12gr zinc.
Hope this adds to the information.
Paul.
.
Re: Silver Soldered?
A Gorham sample dated back to 1887: viewtopic.php?f=18&t=55588