help with hallmark

MARK IMAGE REQUIRED
Post Reply
crapname
Posts: 2
Joined: Wed Sep 26, 2012 1:37 pm

help with hallmark

Post by crapname »

can anyone help with this

https://www.dropbox.com/s/9idzig2qldzy8 ... %20009.jpg" onclick="window.open(this.href);return false;

friend found this metal detecting but I cannot identify the hallmark
dognose
Site Admin
Posts: 61986
Joined: Thu Dec 29, 2005 12:53 pm
Location: England

Re: help with hallmark

Post by dognose »

Hi,

Welcome to the Forum.

An image of the whole item may provide a clue.

Trev.
crapname
Posts: 2
Joined: Wed Sep 26, 2012 1:37 pm

Re: help with hallmark

Post by crapname »

Sorry about the link, it was the only way I found to put picture on,

Full size picture would not help, item is scrap of silver, probably a band off something, now flattened

measures 1/2" x 2" (13mm x 50mm)

just trying to identify the hallmarks

Bill
SirWatkynBassett
Posts: 65
Joined: Tue Nov 22, 2011 10:34 am

Re: help with hallmark

Post by SirWatkynBassett »

Hello,

You state "Full size picture would not help", You sound very sure, so it sounds like you have already done much searching with no avail. The positioning and orientation on band marks can sometimes give a clue to the trade of source, stick/cane makers, umbrella/parasol makers, pipemakers, cutlery ferule makers, etc. but presumably not in this case.

Bassett
salmoned
contributor
Posts: 317
Joined: Wed Jun 20, 2007 8:38 pm
Location: Hawaii

Re: help with hallmark

Post by salmoned »

No hallmarks, just a maker's mark - sorry.
Post Reply

Return to “Silver Plate Trademarks - Single Image”