Please, what is this hammered silver item?

What was this used for? - PHOTO REQUIRED
Post Reply
WantToKnow
Posts: 4
Joined: Fri Feb 01, 2008 5:07 pm

Please, what is this hammered silver item?

Post by WantToKnow »

Image
.
admin
Site Admin
Posts: 2495
Joined: Fri Apr 01, 2005 6:52 pm

Post by admin »

At a glance, it could be a ladle or an ashtray, but knowing where and when it was made would help a lot. How is it marked?
Regards, Tom
.
Hose_dk
contributor
Posts: 1526
Joined: Sun May 28, 2006 1:39 pm
Location: Denmark

Post by Hose_dk »

Or something to hold a pipe when it is not in use.
.
byron mac donald
Posts: 410
Joined: Tue Jan 30, 2007 1:45 am
Location: Central Ca. USA

Post by byron mac donald »

Hello-

Could it be a Pap Boat?

Regards-
.
kerangoumar
contributor
Posts: 394
Joined: Tue Jul 17, 2007 12:37 pm
Location: Canada

Post by kerangoumar »

it looks like a chinese soup spoon - or a spoon rest - or a pipe rest. a better picture would help
.
WantToKnow
Posts: 4
Joined: Fri Feb 01, 2008 5:07 pm

Post by WantToKnow »

Thank you for your patience with me. I was not able to get back to posting here because my babies have been sick.
Thank you all very much for trying to help me determine the purpose of this item. I will add some more pictures that may be more helpful.
Yes, I would appreciate any help also in identifying its maker. In case this is helpful information, from all my trying elsewhere, I have learned only that it is known that there were two 19th Century silversmiths whose name might be the one indicated here, a Dennis Valentine of Syracuse, New York, and a Philip Valenti of Kentucky; however, I have not learned of a known example nor reference illustration of the mark of either of them. This item was found between those places, in South Michigan.
The mark is impressed (or tapped in) unevenly on the upper side of the flat rim of the item.

Image
.
admin
Site Admin
Posts: 2495
Joined: Fri Apr 01, 2005 6:52 pm

Post by admin »

Hi,
Sorry, no chance that it is a piece of 19th century American silver. Better images of the item itself would help and please tell us if it has any other marks on it, and if so, what they are.
Thanks, Tom
.
WantToKnow
Posts: 4
Joined: Fri Feb 01, 2008 5:07 pm

Post by WantToKnow »

Oh, no disappointment. I am very glad to be getting this help from such knowledgeable people.
It had what seemed to be ages of tarnish.
That photograph I put on shows the entire marking, the only mark on the item.

Here is a view from the side, showing that it stands on a flat bottom. The entire thing seems to have been hammered from its upper side and also pressed with some sort of narrow tool just around the outside of the inside (upper side of) bottom (where it curves upward from the bottom), and it has this same tooling along a rounded V-shaped channel or groove that extends up each end of the bowl part and to each end of the item. In a little of the tooling in the channel toward the higher end of its bowl (I mean the end away from what seems to be a handle end of the object) there is just a little coppery appearance; otherwise, it seems to be silver everywhere, even the edges.

Image

Image

And here is a picture from overhead, with a circle around that only place where it is marked, on the upper side of its flat rim near what seems to be a handle end.

Image
.
Joop

Post by Joop »

This looks to me like a tea-spoon. Not a tea-spoon for stirring a cup of tea, but for scooping tea-leaves into a pot and adding water next.
.
byron mac donald
Posts: 410
Joined: Tue Jan 30, 2007 1:45 am
Location: Central Ca. USA

Post by byron mac donald »

Hi Want-

The more I look at it; the more I am thinking ladle rest, just a guess.

Byron
.
dragonflywink
co-admin
Posts: 2500
Joined: Wed Jun 22, 2005 10:42 am
Location: Orlando, Florida
Contact:

Post by dragonflywink »

Every time I see it, I think Chinese soup spoon. *shrugs*

~Cheryl
.
byron mac donald
Posts: 410
Joined: Tue Jan 30, 2007 1:45 am
Location: Central Ca. USA

Post by byron mac donald »

Hi Cheryl-

At 9 inches that would be a big soup spoon; a person would have to mighty hunger.


Best wishes- Byron
.
dragonflywink
co-admin
Posts: 2500
Joined: Wed Jun 22, 2005 10:42 am
Location: Orlando, Florida
Contact:

Post by dragonflywink »

Heh, I've seen the ceramic ones even larger than 9 inches, assume that they're used for serving soup or rice.

~Cheryl
.
byron mac donald
Posts: 410
Joined: Tue Jan 30, 2007 1:45 am
Location: Central Ca. USA

Post by byron mac donald »

Hi Cheryl-

Now thats my kind of restaurant, sounds Yummy! when you going to take me there? ;-)

Best wishes- Byron
.
sol7
Posts: 11
Joined: Thu Oct 04, 2007 10:33 pm
Location: Upstate NY

Post by sol7 »

Apparently it is a "pap boat" according to a listing on eBay:
.
admin
Site Admin
Posts: 2495
Joined: Fri Apr 01, 2005 6:52 pm

Post by admin »

It certainly resembles a pap boat in form as well as the aforementioned Asian spoons, but this piece gives every indication of dating from the mid to late twentieth century. Pap boats are also quite smaller, usually in the 3 to 4 inch realm and silver examples generally date from the mid 18th century to the early 19th.
The more often I view it, the more it brings to mind mid twentieth century examples of hammered Italian silver, often marked "fatto a mano" (hand made) alongside the standard Italian hallmarks. Given the mark on the piece, which seems to be "? Valenti", I think it may be a non silver piece from the same time and place.

Regards, Tom
.
WantToKnow
Posts: 4
Joined: Fri Feb 01, 2008 5:07 pm

Post by WantToKnow »

Thanks to everyone who has helped out on this thread. You all are great to help with your knowledge and provide your insight. This is an amazing website. Besides the help in this forum, the site has helped me identify a dozen or so makers.
.
Post Reply

Return to “Mystery Objects”