'Running Bear' but is not an exact match to the marks I find. Any help is appreciated, Best wishes, Herbie.
Native Maker?
-
steelheadwill
- Posts: 13
- Joined: Mon Feb 18, 2013 2:34 pm
Native Maker?
Hi everyone, been trying to ID this maker for a while, looks similar to a mark used by native American artist
'Running Bear' but is not an exact match to the marks I find. Any help is appreciated, Best wishes, Herbie.
'Running Bear' but is not an exact match to the marks I find. Any help is appreciated, Best wishes, Herbie.
Re: Native Maker?
Hi Herbie,
Sorry, I can't help with the maker.
For those who are not aware of the meaning of the mark '1/2012KGF' , it means that 1/20th of the item's total weight must be 12 karat gold.
Here is the definition and the legal standards from a US Government website:
http://edocket.access.gpo.gov/cfr_2003/16cfr23.4
(3) An industry product or part thereof on which there has been affixed on all significant surfaces by soldering, brazing, welding, or other mechanical means, a plating of gold alloy of not less than 10 karat fineness and of substantial thickness may be marked or described as "Gold Filled," "Gold Overlay," "Rolled Gold Plate"or an adequate abbreviation, when such plating constitutes at least 1/20th of the weight of the metal in the entire article and when the term is immediately preceded by a designation of the karat fineness of the plating which is of equal conspicuousness as the term used (for example, "14 Karat Gold Filled," "14 Kt. Gold Filled," "14 Kt. G.F.," "14 Kt. Gold Overlay," or "14K. R.G.P."). When conforming to all such requirements except the specified minimum of 1/20th of the weight of the metal in the entire article, the terms "Gold Overlay" and "Rolled Gold Plate" may be used when the karat fineness designation is immediately preceded by a fraction accurately disclosing the portion of the weight of the metal in the entire article accounted for by the plating, and when such fraction is of equal conspicuousness as the term used (for example, "1/40th 12 Kt. Rolled Gold Plate" or "1/40 12 Kt. R.G.P.").
Trev.
Sorry, I can't help with the maker.
For those who are not aware of the meaning of the mark '1/2012KGF' , it means that 1/20th of the item's total weight must be 12 karat gold.
Here is the definition and the legal standards from a US Government website:
http://edocket.access.gpo.gov/cfr_2003/16cfr23.4
(3) An industry product or part thereof on which there has been affixed on all significant surfaces by soldering, brazing, welding, or other mechanical means, a plating of gold alloy of not less than 10 karat fineness and of substantial thickness may be marked or described as "Gold Filled," "Gold Overlay," "Rolled Gold Plate"or an adequate abbreviation, when such plating constitutes at least 1/20th of the weight of the metal in the entire article and when the term is immediately preceded by a designation of the karat fineness of the plating which is of equal conspicuousness as the term used (for example, "14 Karat Gold Filled," "14 Kt. Gold Filled," "14 Kt. G.F.," "14 Kt. Gold Overlay," or "14K. R.G.P."). When conforming to all such requirements except the specified minimum of 1/20th of the weight of the metal in the entire article, the terms "Gold Overlay" and "Rolled Gold Plate" may be used when the karat fineness designation is immediately preceded by a fraction accurately disclosing the portion of the weight of the metal in the entire article accounted for by the plating, and when such fraction is of equal conspicuousness as the term used (for example, "1/40th 12 Kt. Rolled Gold Plate" or "1/40 12 Kt. R.G.P.").
Trev.